Back to Questions
Want to know:
"Cleanouts must be installed at each change of direction greater than __________ in the building sewer, building drain and horizontal waste or soil lines. Where more than one change of direction occurs in a run of piping, only one cleanout shall be required for each 40 feet (12 192 mm) of developed length of the drainage piping. A. 30 degrees (0.52 rad) B. 45 degrees (0.70 rad) C. 45 degrees (0.79 rad) D. 60 degrees (1.05 rad)!"
Get a detailed, AI-powered explanation for this question and thousands more on StudyFetch.
Get the Answer for FreeHow StudyFetch Helps You Master This Topic
AI-Powered Answers
Get instant, detailed explanations powered by AI that understands your course material.
Deep Understanding
Go beyond surface-level answers with step-by-step breakdowns and examples.
Personalized Learning
Spark.E adapts to your learning style and helps you connect ideas.
Practice & Test
Turn any question into flashcards, quizzes, and practice tests to solidify your knowledge.
Explore More Questions
- "Lavatories must have waste outlets not less than ___________ in diameter. A strainer, pop-up stopper, crossbar or other device shall be provided to restrict the clear opening of the waste outlet. A. 1.25 inches (32 mm) B. 1.5 inches (38 mm) C. 2 inches (51 mm) D. 3 inches (77 mm)!"
- Physics Chapter 8 - Charge and current - Cross sectional areaWhat must change if the cross sectional area of the wire changes ?What will happen to the mean drift velocity if the cross sectional area of the wire decreases.
- " Shower and tub-shower combination valves must be equipped with a means to limit the maximum setting of the valve to 120°F (49°C), which shall be field adjusted in accordance with the manufacturer's instructions. _______________________ can not be utilized to comply with this section of the code. A. pressure balancing valves B. combination balanced-pressure/thermostatic valves C. In-line thermostatic valves D. any of these!"